Equipment specially designed & suitable for Electronic Industry, Space Programs Research, Research Labs, Blood Banks, Biological Specimens, Serum, Vaccines, Research Laboratories Medical Specimens, Clinical Samples, Industrial research etc, for testing under extreme low temp. conditions.
Constructed with CRCA sheets of suitable gauge & angle iron frames are provided, construction is of double or triple walled. Inner is made of S.S 304 & Outer is M.S Non-contaminant epoxy powder coated with thick insulation of resin-bonded glass slabs are filled in between the two walls. Double walled door with heavy duty hinges, spring & roller type latch catch as locking device. Adjustable ventilators are provided for letting the moisture go out.
Above Ambient +10 C to +60 C
Accuracy : +0.2 C
Microprocessor based PID temperature controls with calibrated class ‘A’ PT-100 sensors traceable to ERTL / NABL accredit labs.
Air Circulation :
Efficient forced air circulating system is provided to ensure uniform conditions inside the chamber.
Control : PID action Microprocessor- controlled temperature and alarms with non-volatile memory.
Display : Large, bright, Digital Touchscreen LCD, user interface.
Calibrate : Set control probe parameters.
Operating Voltage : 230V, 50/60Hz, 12.0FLA.
Electrical Safety Compliance : IEC 61010
Models available as per GMP / Complete S.S unit, Data Logger with printer interface, RS 232 CPC / RS-485 Printer interface for multiple networking controller.
Built-in temp. deviation audio / visual alarm. Safety thermostat for over shoot temp. cut off, safety circuit to cut off the whole system in case of malfunction.
ISO 9001:2015 Certified Co. D&B registered & CE mark product. Calibration & validation certificates traceable to NABL / ERTL accredited labs.T
Data logging with RS-232/485 inter phase, inbuilt system monitoring and reporting technology SMART diagnostic software with audio-visual alarm for temperature deviation power fail more than 5 Degree C and system fail & low battery, Battery backup for alarm during power failure, password access for temp. set point alteration.
A suitable K.V.A Servo Controlled Voltage Stabilizer is strongly recommended in case of voltage fluctuations.
|Model No: SRL-BI -15||BI-A||BI-B||BI-C||BI-D||BI-E|
|Chamber Size (cms||40 x 40 x 40||45 x 45 x 45||45 x 45 x 60||60 x 60 x 60||60 x 60 x 90|